Home » Vending Miser » Cooler Miser » USAT PlugMiser Model PM150
USAT PlugMiser Model PM150
Yes! Available up to 
USD 
Shipping Information:
Arrives:
Mar 25
Arrives:
Mar 23
Arrives:
PlugMiser saves energy on all types of plug loads, such as video arcade games, computer monitors, task lights, radios, copiers, personal printers, space heaters, and more. The equipment will automatically power back up when someone approaches it. PlugMiser’s built in Sensor Repeater allows banks of equipment to be controlled with multiple PlugMisers using only one PIR sensor. PlugMiser can be combined with any other Miser family product.
Electronic arcade games can draw up to 500 Watts, a pair of office task lights typically draw over 70 Watts, and a computer monitor draws between 80 and 240 Watts. Other office equipment will further increase power consumption. Powering this load down when not needed can result in savings of over 0 per year per office.
Additionally, keeping an office\'s electronic equipment powered off unless the office is actually occupied lengthens the expected lifetime of the equipment. Air conditioning load is also reduced, resulting in further savings.
The Bad:
The Bottom Line:
Full Review
PlugMisers Benefit the Environment - One PlugMiser can reduce greenhouse gas emissions by 1200 lbs. of CO2 and 2050 grams of NOx each year. (Based on equipment drawing 225 Watts, occupancy, and the Environmental Information Administration’s national average of greenhouse gas emissions and electricity generation.)
Continuously Running Plug Loads Can Finally Be Controlled - the PlugMiser controls nearly any plug-in piece of electrical equipment such as video arcade games, task lights, personal printers, etc.
Invisible to the User - equipment is powered up when the user enters the area, and powers down when the area is vacant.
Community Loads Such As Copiers and Vending Machines Can Easily Be Controlled - using PlugMiser’s 1, 2, or 3 hour timeout. Rugged 12 Amp capacity allows PlugMiser to control large loads without hazard.
Easy Installation - due to PlugMiser's universal mount PIR sensor. PlugMiser's 1230 Watt capacity ensures that a large assortment of loads can be safely controlled.
ELECTRICAL SPECIFICATIONS
Input Voltage: 115 Volts
Input Frequency: 50/60 Hz
Maximum Load: 1230 Watts (Steady-State)
Power Consumption: Less than 1 Watt (Standby)
ENVIRONMENTAL SPECIFICATIONS
Operating Temp: 0°C to 50°C
Storage Temp: –20°C to 60°C
Relative Humidity: 80% Maximum
(Non-Condensing)
COMPATIBILITY
Electrical Devices: Any type, as long as
PlugMiser’s maximum power
rating is not exceeded
INACTIVITY TIMEOUTS
Timeout period: 3 Seconds (Test Mode)
15 Minutes*; 25 Minutes*
1 Hour; 2 Hours; 3 Hours
* = available w or w/o 30 second initial timeout
DIMENSIONS
Size: 4.5"W x 1.75"H x 3.25"D
Weight: 2 lb. (including power cables)
REGULATORY APPROVALS
Safety: UL/C-UL Listed Information
Technology Equipment (ITE)
9T79
Product brochures
Product manuals
4.0 of 5 (1 reviews)
Works exactly as advertised. Inexpensive.
The Bad:
Motion sensor mounting plate broke during install
The Bottom Line:
A nearly perfect product.
