Home » Energy Savings Products » Energy Saving Guide/Book » USAT VendingMiser Master Unit E-Z Install, Model VM170
USAT VendingMiser Master Unit E-Z Install, Model VM170
please call (877)766-5412 to confirm
USD (change) 
The VM170 model includes the VendingMiser controller, E-Z Install bracket and occupancy sensor.
For complete product information on how the vending miser works, please see the VendingMiser VM150 master unit.
VendingMiser® Installation How To Video
The Bad:
The Bottom Line:
Full Review
VendingMisers Benefit the Environment - One VendingMiser reduces greenhouse gas emissions by 2200 lbs. of CO2 and 3600 grams of NOx each year. (Based on occupancy and the Environmental Information Administration’s national average of greenhouse gas emissions and electricity generation.)
VendingMiser is Easy to Install - The new Easy-Install VendingMiser allows installation with no tools.
VendingMiser is Invisible to Users - equipment is powered up when anyone approaches the machine, and is powered down when the area is vacant.
Product Integrity is Maintained - VendingMiser measures ambient temperature and compressor current, repowering the vending machine as needed to ensure that cold product temperature is maintained.
VendingMiser is Accepted for Use by Coke and Pepsi - Vending Miser has been tested by The Coca-Cola Company and The Pepsi-Cola Company and they have concluded that the VendingMiser has no impact on product quality or on the vending machine.
Product is Always Available for Vending - The customer never sees a powered down vending machine.
Electrical Specifications
Input Voltage: 115 Volts
Input Frequency: 50/60 Hz
Maximum Load: 12 Amps (Steady-State)
Maximum Load: 1050 Watts (Steady-State)
Power Consumption: Less than 1 Watt (Standby)
Environmental Specifications
Operating Temp: -15 degrees C to 75 degrees C
Storage Temp: - 40 degrees C to 85 degrees C
Relative Humidity: 95% Maxiumum (Non-Condensing)
Compatibility
Vending Machines: Any machine, except those containing perishable goods such as dairy products.
Inactivity Timeouts
Occupancy Timeout: 15 Minutes
Auto Re-power: One to three hours, dynamically adjusted, based on ambient temperature.
Product brochures
Marketing
Product manuals
Tools
4.3 of 5 (4 reviews)
Very esy to install
The Bad:
The bracket could extend further to the front for the deeper machines
The Bottom Line:
Appears to work well. Just installed 5/10.
Works really well.
The Bad:
If paired with one or more snack machines, make sure you have the right slave model.
The Bottom Line:
Other than the slave issue we had (because our person didn't understand the products well enough) they are GREAT
This was easy to install and the beverages are ice cold when they need to be.
The Bad:
The sensor is not very attractive but it's a small price to pay
The Bottom Line:
This product is great! We ordered it for our office vending machine, which dispenses beer, because we're trying to implement green initiatives around the office. Many were worried that the beer would get too warm or go bad but you don't even notice a difference. We couldn't be happier.
Easy to install
The Bad:
none
The Bottom Line:
Would reccomend to others
-
Price $308.95 -
Price $223.94 -
Price $1590.00 -
