Home » USAT CoolerMiser Master Unit, CM150
USAT CoolerMiser Master Unit, CM150
Yes! Available up to 26 units 
USD (change) 
Shipping Information:
Arrives:
Mar 25
Arrives:
Mar 22
Arrives:
CoolerMiser will power down a glass front machine when it determines that no one is in the area around the machine. Like other Miser family members, CoolerMiser utilizes a Passive Infrared (PIR) Sensor to determine occupancy in the area around the glass front machine. For a bank of machines, CoolerMiser can utilize its unique embedded Sensor Repeater, which allows it to be controlled from the PIR sensor of any other Miser in the bank. This facilitates a quick and simple installation.
CoolerMiser can save an average of $100 per year, per cooler in energy costs. In addition, one CoolerMiser reduces greenhouse gas emissions by 1,600 lbs of C02 and 2,740 grams of NOx each year.*
Additionally, keeping a glass front machine’s electronics powered off, unless the machine is actually needed, lengthens the expected lifetime of the equipment and reduces its exposure to damaging power line spikes. Air conditioning load is also reduced, resulting in further savings. CoolerMiser is proudly made in the USA.
*Based on occupancy and the Energy Information Administration's national average of greenhouse gas emissions and electicity generation.
The Bad:
The Bottom Line:
Full Review
A quick, inexpensive solution for energy savings
Environmental benefits
Early ROI
Longer machine lifespan
Capability to control single-, double- or triple-door coolers
Power sense that's as cool as it gets...
Compatible with all glass-front coolers that contain non-perishable goods, CoolerMiser's Passive Infrared Sensor (PIR) powers down the machine when the surrounding area is vacant.
CoolerMiser's Inside intelligence...
Monitors the room's temperature
Periodically re-powers the cooling system
Ensures that the product stays cold
Behavior you can trust...
CoolerMiser™ analyzes the cooler's performance on a cycle-by-cycle basis, constantly responding to changes in load, sales and environment. It then modifies its behavior accordingly, ensuring proper operation and temperature controls.
This Miser runs the bank...
For a bank of coolers, CoolerMiser™ can use its embedded Sensor Repeater, which allows it to be controlled from the PIR sensor of any other Miser in the bank.
Ups and downs...
CoolerMiser's™ electrical current sensor eliminates compressor short cycling - it will never power down the machine while the compressor is running.
And when the machine is powered up, the cooling cycle is allowed to finish before again powering down, reducing the wear and tear on your machines...and prolonging your profitability per unit.
Energize your savings and conservation...
CoolerMiser™ can save an average of $100 per year, per cooler in energy costs. In addition, one CoolerMiser™ reduces greenhouse gas emissions by 1,600 lbs of CO2 and 2,740 grams of NOx each year*.
* Based on occupancy and the Energy Information Administration's national average of greenhouse gas emissions and electricity generation.
Electrical Specifications
Input Voltage: 115 Volts
Input Frequency: 50/60 Hz
Maximum Load: 12 Amps (Steady-State)
Power Consumption: Less than 1 Watt (Stanby)
Environmental Specifications
Operating Temp: 15 degrees C to 75 degrees C
Relative Humidity: 95% Maximum (Non-condensing)
Compatibility
Slide Coolers: Any cooler, except those containing perishable goods, which do not exceed 12 AMP nameplate rating.
Inactivity Timeouts
Occupancy Timeout: 15 minutes
Auto Re-power: One to seven hours, dynamically adjusted, based on cooler performance and ambient temperature
